The inner plywood is rotted in the very front of the hull, or should I say that it is missing in a few spots lol.
PAR just checking on you meaning of encapsulated, do you mean to just apply epoxy to all of the surfaces of the plywood or to attach the plywood...
PAR so it is wise to use 3M-101 to bond planks to plywood and is it ok to use the 3M-101 to caulk the plank seams before painting the bottom?
Gonzo I will need to fill the gaps between the planks since they have dried out. Would the outer 3/4" planks swell even when they are bonded with...
PAR, yes this boat is a double planked hull with 1 layer of plywood inside and 1 layer of individual planking about 3/4" thick running fore and...
PAR I though a epoxy bottom on wood were not be a good idea since the wood will move over time and crack the fiberglass and allow water in between...
PAR thank you for all the info I really appreciate it. When I use the 3M-101 should I apply it to the inside of the plywood at frame location...
Gonzo thank you for the info.
Would love to hear what would be the best marine plywood to use and what kind of outer planking if planks need to be replaced.
After reading thousands of posts about 5200, west system etc., I need to replace the inner plywood on the bottom hull and it seams everyone has...
