Thanks guys, that is awesome advice on the non-skid! Here is the repair on Gouge1 pre-nonskid [IMG] Crack1 turned out quite nicely! [IMG]...
My friend mentioned maybe getting some grip tape from a local skate shop and gelcoating over that?
Thanks for the tips PAR! Going off your roller idea, do you think I could press some rough 40 grit sandpaper into the gelcoat while it's still...
Here's an update on Gouge1, I've added 403 filler and sanded it down, but discovered some voids (pictured). I then filled these up and will sand...
Thanks guys! I peeled away the broken core material, added new glass, then used 403 filler to fill to just above the outer glass, and will sand it...
Would the boat survive and still be strong enough without repairing the inner fiberglass layer, and just saturating the core with resin and...
Thank you for the guidance! I think the upper portion of the core is less stable, it feels that the inner glass layer has been fractured and is...
My 2004 Hobie Tiger was picked up and dragged around during a windstorm here in Lake Tahoe. As a result, I need to do some work! I'm fortunate...
