For a given boat length - let us say 26 foot - and all else the same in terms of the boats payload, will a planning cat be more or less fuel...
I have a stitch and glue center console with mahogany gunwales that I built. I covered the mahogany with with Gurit SP115 epoxy resin which is...
Please forgive this somewhat off topic thread - but I couldn’t think of a better place to ask about hydrodynamics. Marlin lures are traditionally...
So I hear this a lot - almost always in relation to a “stitch and glue” type hull build - ie. Tolman skiff etc …. That using wood and epoxy...
A friend is restoring this Riva run about. He has taken all the rotten plywood out and also the rotten ribs and replaced them. He says there...
Home - Durable http://duraply.one/en/ This Duraply is supposed to exceed “marine ply” according to the marketing schpiel... Curious to hear any...
This boat belongs to a friend of mine. It is ply on frame and I am not sure was built from any plans. I think the builder just sort of thumb...
I need a new high pressure pump for my 2012 Yamaha F150 BET - part no is 63P-13907-04-00. They are about 400 bucks. I see quite a lot of...
What is the best way to figure out where to place a center console on a hull rebuild? I could either launch the boat and move weights around or...
These are two boats that I really like the looks of, by two designers who both seem highly respected in their fields. Kingfisher 26 Offshore...
So here is a 19 foot Stitch and Glue Center console that I build from plans by Jacques Mertens (Classic 19 (C19) - Study Plans...
I have an 18 foot flat bottom dory that is built in stitch and tape plywood - it pounds a lot in our short chop. Would it be impossible to add...
In theory, what would one have to do to make a 19 foot constant deadrise, moderate V planning hull Center Console more efficient at speeds of...
I have found a Hardware Dealer who is importing this stuff... Dolphin Superply Marine Plywood...
So what was meant to be a simple transom extension has changed into a major rebuild at the very least. Whilst I had the engine off to extend the...
Would it be possible to add an Armstrong type floatation transom bracket to this hull - and would it drastically affect trim with a 150 HP 4...
Having gone full circle in my thought process I am now wondering whether extending my 19 foot Center console (8 foot beam), 12 degree constant...
I may be opening a can of worms here as I know Carolina boats have some pretty hardcore followers, but there is such a wealth and breath of...