If you want to run older software with your brand spanking new win10 super computer, you can just install WMware player, download the older...
The software works fine with a fixed heel axis, the model just pitch-poles, as it should. It continues from this inverted position from 164 until...
I did some experiments with a dynamic heel axis, but the end result was still the same. The problem I had, was that after 180 degrees of heel, the...
I got some interesting results to say the least :D So, the model vv3k4i supplied to me actually pitch-poled after 16 degrees of heel. The model...
I will be home tomorrow to run the model, but I don't really see a problem with bigger trim values. Thou, this statement is based on code running...
Sure thing! I will run it soon as possible and post the results here.
TANSL, I owe you one! Big time. My results are spot on with the ones you provided. I could tweak the accuracy up also. Displacement is adjusted...
When transom surface is vertical, it is 7600mm from transom and 1000mm up from the lowest point of keel. It is in the same position as the COG...
Thanks. Can you also get the righting arm curve and the associated trim figures for it? vv3k4i, would you be interested in doing the same with...
Many thanks! Can you specify, in which format I could send the model in? Just in case Rhino3d is supported, I have attached the model I used in...
Rhino3d stability calculation plugin Finally on my summer holiday! It took 3 days of hard coding, but it seems that I am finally there! I have...
Much appreciated, thanks.
I haven't done any tests against commercial software yet. I have yet to code the GZ measurement. But soon as I get it done, I am hoping to find...
Hi, nice to see that other people are also working on the same problems :D I do not know how you are doing it, but I am getting all relevant...
Thanks for the tips. I have since switched from vbscripting to a real C# plugin, and I am currently making a GUI for the plugin. This will be...
It took me a while to understand how the model worked, but I am now confident that I can reproduce the results with a Rhino3D model. With the...
Thanks. This clears up a whole lot!
I see what you are getting at. What I mean, is a point that is horizontally aligned with transom and vertically with the lowest point of keel. So...
Hi, I am currently examining the accuracy of using heeled LCB to determine angle of trim against static LCB. In short, I am just tilting the...
