I just have to wait for it to burn off before doing another coat, trying to build up so I never buff through flake
No but I talked to supplier he told me it will do that until I've sealed it off with wax or duratec final coat
Restoring a fish and ski and have been re flaking and clear coating hull but clear gel coat seems to soak up dew every day then dry out, is this...
its a 3.0 but ill put a 120 hp in there for now , I have thought about a sbc however I worry too much weight haven't been able to find out how...
well ... shes apart and was definateley engine cracked piston and possibly cracked block [IMG] [IMG] [IMG] [IMG] lookit the sludge!! good thing I...
[IMG] [IMG]
https://youtu.be/qFwYGPBmDOo https://youtu.be/j4PoIh2hhhM https://youtu.be/LcknRPDs8sU https://youtu.be/OOwlzLS3K-Q < personal favorite
you can use pl premium however I would use screws and seal them once that's done with the pl premium your deck is bullet proof remember the...
[IMG]she floats :)
well foam wont be as strong as plywood ... ever however if you double the layup I am guessing that will compensate for the wood , as far as...
very cool boat , I had thought about a v6 conversion but worried the exta weight would make it drag ***. [IMG] trying to decide if I want to use...
all total my gutted 17 footer cost about 1200 in materials to get it to cap replacement that doesn't include all the stuff I already had for the...
I would go back to it exactly the way they had it , I mean you could make them taller if you wanted but if you make them shorter to lower center...
as I will be mostly cruising intercoastal waterway (not going near ocean in a 17 ft boat ) what electronics besides vhf .depth finder would be...
I did my roof with tri ply underlayment with a sheet of r factor yellow with the faced sides with foil from big box store , I used poly floor...
[IMG] [IMG] [IMG] just some pics of progress , its hot so its slow and I'm jumping around to things while paint drys I did my roof with tri ply...
got the 1708 down on the boat floor did 2 tabs each side and transom 4 then 6" then did a layer across I might put one layer of mat across that to...
thanks par, I foamed it only because of if I ever sold it I was afraid if they sunk and no flotation they could sue me , honestly don't see this...
Par I have sound ways of dealing with itch :) I removed foam and started on floor I wrapped the remaining stringers with 1708 Yeah I was...
thanks par appreciate it. I put the stringers on a 1" bed of pb just to be able to drill and have holes for drainage and not have them in wood...