Hi Bruce Yes I'm guilty as charged when it comes to reinventing the wheel, I just couldn't let a problem like this go untouched as it seemed...
After cutting access holes which will be covered by watertight inspection hatches, I laminated the inner moulding to the hull around the area...
pictures The new interior brackets that spread the load better, fabricated out of 316 stainless, each Wichard bracket has two nuts holding it now...
pictures Hopefully this will work The old eyebolts that the shrouds are attached to.... [IMG] The old tie rods (Port side ) [IMG] The...
Just remembered! The plies running down the hull towards the keel that the knee will be bonded to are going to be 2 x quadraxial 1200grm approx...
Hi Par The Matt I am using is staggered plies of xe600 stitched biaxial with epoxy, I'll post the pics in a week or so after its complete. The...
Happy new year all Sorry for the long delay but have been busy, essentially I have done what you suggested Par. I'll post some photos if I can...
Good evening all My first post so go easy!, I have a Jaguar 23 (Catalina in the states). The eye bolts on the deck that take the shrouds pass...
