Hi to everyone. When I place the patches in Multiframe there are some of them that don't connect properly to the structure. In the attached image...
I'll read these books with very pleasure. Thank you again.
Thank you TANSL. I think like you, the best way is to apply the 12215-5 scantling procedures. Do you have any suggest where I can find books or...
Thank you guys
The ISO 12215 are applicable only for pleasure vessel, isn't it? For other types of boat (exemple small passenger ship) are them also applicable?...
Thanks for your kindless. Remaining in the matter of structure I need help for scantling calculation. In order to dimensioning the structure I...
Thanks for answering. I've been seen the google search you indicated to me and think it is a very useful. Anyway if possible I need a more...
The material used is mahogany. The type of construction is plank on sawn frames. If you have any detailed wood plan it could be very useful for...
Yes, I do. If you have any suggest please let me know. Thanks
Hello to everyone, I'm trying to draw a wood plan of a 18 m boat (round bilge). For my lackness of experience I have some doubts about the correct...
Probably I made a bad impression. Anyway: 1) My intention wasn't to publicate any kind of technical drawing. I posted the rendered screenshots...
I attached the profile, front and upper deck plan. In these screenshot are also printed the two stairs that can be used as support to upper deck....
I thought to use two different materials because the boat is wooden built and I have to leave the both sides open as in the picture. So I thought...
Thanks for the answers. Probably I made the question in a wrong way. 1) Firstly I have to study the local stress of the new deck. The joint I...
Hello to everybody. I have a question for you. I have to design a second deck above the main deck of a small passenger boat with this main...
It's perfect. Thanks a lot for your precious advice. I will read with attention. One last question. Did you study the possible problems to the...
Tank you TANSL. The structure is to be built in mahogany plywood with epoxy. Do you have any suggestion about how watertight the structure in...
Hello to everybody, I have to design a new glass bottom boat. This boat has to navigate within 1 mile of the coast, has to transport up to 30...
Hello guys, thank you for your precious help. Rabah How did you correct the bow cone problem in rhino?For your last post I think the difference...
Hello guys, I think to have found the problem :D After I tryed many times, I changed one option in "Section Calculation Option at maxsurf...