Hye, i'm doing trial in order to infuse a 40ft hull. During my trial everything is going right until i cut off the resin inlet. The full part is...
You have to use a software which can do parametrics drawings. So there is: SolidWorks; SolidEdge, ProEngineer, Catia, Autocad Mechanical Dekstop....
You have to use as much UD as you can along the tube axis, then you will need few biaxial for torsion stress and other impact which can happen on...
Honestly Institute is better for small yacht and Uni for large boat at least 4the 3first year cause after people from Institute have to move 2uni...
Rhino is wonderful to design deck and it is really cheap . But it is not really useful to draw hull & structure , for interior design you can try...
4 sailing yacht one-design Old Class J Bruce Farr do very nice yacht &they're fast... Backewell-White in New Zealand Nigel Irens make nice...
Lloyd's SSC do it as well as ABS, Bureau Veritas or ISO , the advantage with Lloyd's is that you've got a nice software which help you to do it;...
You should careful about similar design especially about GRP cause most of the time the data given by architect or builder are really simplified...
It won't change anything about stability or maybe increase it a little cause your hull must be lighter . For structural point of view there is...
hye, you right about displacement vs planning hull. There is no interest at all to design a planning hull if you don't want a high peformance cat...
