Thank You PAR for the reply. It would appear that the cable in question is the control cable from the oil pump of the Oil injection system to the...
Hoping someone can help. We have a 1995 Seadoo HX 720cc. About 10 seconds of max throttle it quits but instantly restarts and will idle no problem...
Thank you all for your insight on what might be the problem. However I think I now know what was wrong. Whitepointer23 it would seem you were...
CDK I think you are misunderstanding. This is all manual lift and drop, the motor stops when it comes to rest against the motor mounting bracket.
Thanks for all the replies. the Motor is a 1986 model # J40ELCDE. it does have a lift assist cylinder on it with a manual tilt support lever that...
Looking for a little info on what I can check or do to help prevent the motor from kicking up while in reverse. Now I know that it is a safety...
Thank you all for your input. I do however have another question. The 40hp outboard for the boat is a long shaft and as you can see from the...
Thank you for your reply and advise. I am not sure if it will fit the additional width so I will remeasure to make sure. However I am not familiar...
The transom in my 16.5 deep V bass boat with a 40hp needs to be replaced. I have noticed several posts that would indicate it should be 1.5" or...