Alright, thanks again kind sir.
Okay thanks, will do. Just wondering if it'll matter if I used a 2 lb. sledge or a 20 lb. Also, this is my first time using rivets and I'm...
Yes, but more of like a 4' x 3' section in this scenario.I was referring to one of the removable sole assemblies as a slat, like the cedar boards...
So I've gotten my first slat cut and ready to sand and paint. I don't need to sand between the coats of the Cetol right since I would be sanding...
Okay, thank you Alan. So today I was going to start cutting some cedar boards that I planned down to 5/8", but I realized I could use a little...
Okay thanks, I didn't know aluminum could rust when in contact with iron. You learn something new everyday. With a google search I found a...
Heres what it looks like. I sanded them off just fine but the first was a little deep where you can see the black line in the middle.:confused:
I've gotten the fir floor prepped and the first coat of deck and porch enamel on. Do I give it a light sand between the coats, maybe with my...
I ended up ripping the 2 x 6s into 2 x 3s and most of it on that section is 1/2 by 3 so it doesn't weight half as much as I was thinking it would....
Alright, I have mostly all off the fir floor cut and fitted mostly. Their spacings are closer than 18", but it seems like their spaced well to...
Finally I was able to cut some wood for the project. :) I found some douglas fir at Home Depot and ripped it down to 1 1/2" boards. I'm just going...
Okay, thanks on the Cetol recommendation, I'll grab that tomorrow. I do like the idea of untreated wood, because I don't have to worry about the...
I'm almost read to start buildining the floor and sole. All I need to do is find some dry PT wood. Does it have to be plywood by the way? And the...
Haha I think you hit the nail on the head with that one, so true. It's not too bad when your on the other end of the stick and find some treasures...
I agree, I need to be more careful with the terminology I use, and I'm going to try my best to improve here on out. That fastening method is...
Wow, your last post really cleared up a lot of confusion for me.I was really confused on how to lay the floors around the benches, while also...
First off, I really appreciate you taking the time to help me out. I know that I'm asking a lot and that your spending a lot of your precious time...
Alright I'm going to return the foam and buy some PT wood. The benches have foam in there and so do the seat and livewell that go in the middle so...
Okay Cetol looks great I'm going to try to find a local dealer here tomorrow. I'm going to follow your recommendations on the boards as well and...
I called around this morning to 10 places until a I found a place with reasonable prices. It was about $6 for a 1x4x8 and i got 22 of those and a...