Redruben, Correction, 20ml to 900ml. In fact I was using just under 20ml.
Guys, Thankfully all for your replies. I’ll check with the manufacturer and get back to you on the MEKP. Spring has finally spring here in...
Yes the entire mix is uniform. The left over in the ice cream container is still going off after days as well however it seems to set quicker than...
MEKP just under 2% 200ml to 900ml Coving I usually mix to a thick peanut butter consistency. Still has a slight sheen to the mix. Scottech...
Hello I’ve been using vinylester resin thickened with cabosil for coves. It is taking days to set. Days are 20+ degrees C, nights down to 3deg....
Thanks Phil. I’ve changed tack and using an alternative to ply called Coosa board. Coosa Bluewater - ATL Composites...
Using 400g double bias both sides. Skim coat of fairing compound over glass to avoid print through. Framing under the deck is at 400mm (16")...
Excellent idea, however it would cost in the order of $75AU for the timber per layer. On this project budget wins over speed of production....
Thanks Guys. Gonzo, I hadn't thought of that. Thank you. I'm using an epoxy resin and HDPE plastic drop sheets. The finish will be sanded and...
I have 13 sheets of 12mm ply that I need to glass both sides. In my limited space it will take quite a long time to do them individually. Can I...
Thanks Ad Hoc I thought it might be. I was at least comfortable (ignorantly) with a displacement hull. A planing hull I know is beyond even my...
The large rocker is purely for displacement mode. Ive had a go at an asymmetric planing hull just to see what it looks like. Let me know what...
Thanks Fallguy, Ive emailed Richard and am awaiting his response.
If I were to investigate a planing hull. Asymmetric catamaran hull form, where is a resource for hull lines.
AdHoc loves a “discussion” doesn’t he. Surprised that hull shape doesn’t contribute significantly to resistance.
I don’t think you're wrong. I think your being rather kind. It’s a bloody monster. Deejay thanks for the links. I’m open to suggestions. Main...
Latest edition to the growing family of boats. Would appreciate your feedback. Ive never had much to do with or thought much about trimarans so...
Iian, I’ve been working on something just like that. The difficulty I have been having is keeping a catamaran under 2.5m wide to trailer and...
Ian, WOW a lot to consider there. I’ve been talking to a company here in Australia “Ecoboats” on elec systems and looking at the torqeedo...
Ok. Sounds a lot like architecture. Make it up as you go along until you have to prove it. Thanks Ad Hoc.
