This puppy is shipping in May. I think the foils might have a nice L/D ratio. Battery weight could be 69.4kg@150Wh/kg (guessing LiFePO4). A...
Sorry for ot. I turned an early Norlin upside down for buffing. I was sure the keel was leaning lightly to stb. There was no indication of damage...
Yes, an abrasive 5-axis waterjet could do the job. It's a highly specialized machine, most waterjets are 2-axis. You can't cut tempered glass....
It might be hard to find out how thick the rv glass is, without having an uninstalled one. Maybe the factory would tell you. Or a laser tape...
Audi didn't do anything, they just bought a startup company for positive publicity and possibly to get a hold of some patents that could be sold...
US hobie 16 mast has a composite top section upwards of mast tang that I believe has a moulded sleeve in it. Could it be made removable?
This "fuel" is just a way to employ electric energy on a diesel car, so it's not anything that will be around for decades as primary source of...
Maybe because it did. So did lots of other vessels that aren't suitable for offshore. Maybe it was far enough to see only 20kt winds for a few...
So.. If the metal box is waterproof, why don't you get rid of the barrells and use the box as hull? What kind of metal are you going to solder the...
If you are REALLY considering this, steel oil barrels are a poor choise. They won't last 2 years of corrosion. Get something like an old barge to...
1) It'll last just fine. 2) Looks safe to me? 3) you could, the chains will hold up fine. 4) Get some volvo penta ips drives. The raft holding...
I made it myself from ground up. Even the batten pocket end plates are diy. I have test fitted it on mast tube and boom, but the cat isn't even...
Looks really draggy. Maybe the foils are for getting the LEDs up?
It's about $26500+shipping and taxes. Swedes sell it @ www.katamaranspecialisten.se. A finnish boating magazine reported briefly about the...
Yes, that's how it works. When on fwd gear, you can spin the prop by spinning the powerhead but not the other way around. There's no ratchet on...
That's exactly how the dog clutch should work. On forward gear the prop will freewheel if the power should stop running. You could pull the spark...
I used to have a clymer repair manual but couldn't find it. IIRC, it's indeed the shift fork pivot pin. I had a few of those o/b:s a decade ago...
Is it just me or do the foils remind of [IMG]Nice top speed. I kinda hope they'd show speeds substained for a few seconds. Or race a flying...
It's about time for an update. The first (port) hull has all the stuff inside. Chainplates are made of 0,8mm stainless and laminated between 3...
https://www.facebook.com/R2AK.TurnPointDesign I think this one is cool.
