The mast for my Core Sound 17 was 3 piece aluminum tubing, little over 20' and weighted about 13 lbs.I also just happen to have recently posted my...
patzefran, You're probably right, but I'm not computer savvy enough to know the difference.But my eyes told me there was something wrong. MM
I think you mast alignment is based on your fwd beam position, which is also true for the dagger/center board. MM
I found that curious to (the stem) because the 1st set of plans I printed out, the angles on blkd #1 were far more aggressive than those I had...
Bfrancis, I don't know of a strike 18 finished with the optional cabin, and haven't seen a picture of one to date. Hope to have mine done by...
forgot to mention the prindle hulls will accept 4'' tubing or 4.5'' mast extrusion as is standard for the prindle,plus being asymmetrical no...
Bfrancis, the Strike 18 does have an optional lift off cabin that can sleep 2 or with cabin off seating for 6. 2 years back I built a Core sound...
http://www.boatdesign.net/forums/multihulls/small-tris-under-20-any-mention-foils-ban Bfrancis, I'm presently building a Strike 18. To that end I...