Hi, Does anyone have this paper as pdf? Blount, D.L. and Hubble, E.N., Sizing Segmental Section Commercially Available Propellers for Small...
I am looking for resistance data/prediction methods for very slender hulls, with length/beam ratio of around 20 and Froude number of up to...
Using the factors presented in: Wake Adapted Ducted Propellers, M.W.C. Oosterveld, PhD-thesis Delft University of Technology, Year 1970. I am...
Does any have the charts for the: Ka 3–50 with the 19A Nozzle? I am guessing its in the Oosterveld, M.W.C. Ducted propeller characteristics,...
Does anyone have the Trimax Bravo comparative test done by Boating magazine spetember 1997?
I am looking to buy some controllable pitch model scale propellers. I think there was a german manufacturer that made some, but cant find them...
Is the world ready for a new Variable Pitch Surface Drive? With low or no appendage drag, high propulsive efficiency, shallow draft and good low...
Looking at a long very slender monohull with twin propellers, on this particular design the optimum propeller diameter meter is limited by having...
Does any have a decent 3 model of the 10.3 liter sea-tek enigne. I recived a model from seatek but is too rough to use in any renderings for...
Does anyone have a list of what modifications that can be done to the yamaha 90 in the blueprinting/tunning process for offshore 3B?
Anyone know what happened to this? Remember reading about it some years ago....
Without using RIB air tubes, what options are there for light weight fendering for high speed boats. Anyone know what this fender is made of?
Anyone know what’s involved in making petrol fuel tanks that’s integral to the hull? Presumably is a matter of using a special coating inside tank?
Anyone know why the Trimax drives are no longer on the ZF – marine home page? http://zf-marine.com/ZFR/Surface_Drives/index.cfm?PID=A
Does anyone any direct comparison data between these drives? Have anyone fitted these drives to the same boat. Especially interested in behaviour...
What is a typical aerodynamic lift/drag ratio for high-speed power mono hulls? I am tying to evaluate some results that do not quite make sense.
Does anyone have this article? Wikeby O. (1990), 'Aerodynamics of offshore powerboats', Ship and Boat International, April, pp 13-16. I would...
Does anyone know where I get hold of drawings/3d models of the full F-16 Canopy? Looking to incorporate a full canopy in to a race boat design....
Does any one have a good expression for estimating the wake shape from planing hulls?