I'm looking for a gook book on boat trailer building. I have the Glen-L one but I want more informations on structure and design.
I try to install a Gas fill and vent on my hull. I need to make an asymetric hole. I can find a good hole shape that keep enough lips to...
I know many powercat design for coastal cruising but I can't find powercat design for offshore and trans-ocean cruising. Does this kind of boat...
I tried to find information about use of dynamic lift or not with outboard transom bracket without succes. What is the pro and con of this two...
I'm building a center console boat with 2 outboards motor. I'm tinking about battery wiring diagram. My outboards are 85 HP 2 strokes Yamaha. I...
Last week, I made a big mistake with epoxy. I laminated a 15.2 oz 0-90 fiberglass on a bare wood hull (inside). I need 8 x 1 pounds epoxy batch....
I try to find rules for dimension of seats (height, widht and deep) and feet clearance. It is for a open deck boat. I need three row of seats....
Does somes ones try to build a boat trailer in wood ? It is possible for a 3000 lbs boat? I can't find technical info on WEB!!
I just buy 2 parts pourable foam for my boat. My seller dont really know how to use it. What is your suggestions? Can I heat part A and part...
Hi I just finish fairing on my hull and before primer, I need advice on strakes. For fiberglass layup, I sand strake edge to a round shape....
Hi Does somebody can help me to find informations on maximum radius allowed for good water separation at transom and on strakes for a planing...
Hi I just finish fiberglassing of my hull. To help the fiberglass to turn over strakes and chines, I shape the chines with a 1/2" (13mm) radius...
My friend had a 34 feet wood boat that's need renovation. It is a square plank hull in mahogany with ribs in mahogany too. The planks are 3 inches...
Can I use a steel roll (generally for Mat with polyester resin) on Bi-Axe fiberglass in Epoxy ?
I'm looking for information about motorsailer design (More motor than sailer). Does someone have good books to suggest ?
I just received two 5 gallons buckets of Epoxy from a friend who leave out the region. He bought it last winter and I supposed that he keep it...
Does someone know a good fiberglass supplier in Canada (East coast prefered) that sell Bi-axe? Thanks
Hi Does some body can inform me if 24 oz woven roving in epoxy is stronger of 15.2 oz 0-90 Bi-axe in epoxy too ? I can have a roll of 24 oz...
I'm in process to put fiberglass (with Epoxy) on a new strip planking hull. I'm looking for a layer of 17 oz (45-45) biaxe plus two 18 oz...
I'm in my first boat building project and I'm just begining with fillers in Epoxy. I mix in a roller tray with a small trowel. I lost my time...