Thanks Buddy. That does sound like a good primer/finish.
Thanks everyone. I appreciate all the info. God Bless. Dave
Hi all. I have a question about finishes for a wooden boat. I hope it doesn't seem dumb, but here goes... I have seen a few boat projects that the...
Thanks Petros. I really like the one they call Parti-O. Mine would be a little simpler. I would want a bigger front deck for fishing off of and a...
We sealed it inside with marine spar varnish and outside with fiberglass resin. If I had it to do over I think I would use the spar varnish inside...
I'm thinking about building a shanty boat. Nothing too big. about 8 ft wide by 16 to 20 ft long.
The boat has a surround sound 4 way CD/radio stereo, front red/green light, front 1,000,000 cp spot/flood light, rear all around light, hand held...
Yep we did. we used a marine grade spar varnish for the inside.
We used Gorilla Glue to put it all together along with a few regular drywall screws. We used fiberglass cloth and resin over the outside of the...
These pics show it taking shape. putting our floor in installing the stereo, flooring, and other stuff and putting our side strip on etc.
The next pics are of the decking on bow and seat installed. We made under bow storage and added some cool stuff.
The next pics in order are our bracing inside and building up the bow and seats.
Our Homemade Pond Popper Here is our start on our hull. The front is cherry (for strength) The bottom is 1/4 inch plywood. The sides are luan...
Hello everyone. I just joined today. The site looks great and of intense interest to me. Back in 2009, my son and I built our own small pond...
