Hi, For you what is the main diffrence between these tree software Aqwa Hydrostar and Diodore ? Same question for the tie software Orcaflex,...
Hi tspeer Indeed I have allready done some simulation with the mooring attach on the center of the vertical plane, but results show that it s...
Sorry for the RAO of 300, it s in (deg/m) for a scale model of 0.5m high.
The heave motion is reasonable on the device. In the following graph you can see the RAO heave (m/m) with a max of 1.2 and the RAO pitch (rad/m)...
I m working on the design of the mooring of an oscillating water column wave energy convertor. The particulars of the device that the float like a...
On the precedent graph of heave RAO, the two first peak one come from resonance of the device in heave and another probably link to surge...
Hi musiice, Heave RAO below after inertia correction, it s not realy better my mail antoinedenijs#hotmail.com (#=@) Best regards.
Hum I just find a mistake in the inertia of the point of mass. Probably the cause of the problem. Answer after 10h of run...
Hi musiice, I join a capture or the model for have a idea of the wave energy converter. ogWAVE by Ocenalinx...
Hi musiice, Thanks for you answer. For the frequency it in Hz. I actually work with a scale model (1:30) so device is more and less a cube...
Hi, I m working on a mooring solution for a wave energy convector and I need calculate my RAO on AQWA to work thereafter on Orcaflex. My...
