I had to cut out some delaminated CSM with gel coat on top. I was just going to put CSM back in the repair, but I started to think. What if I...
I know that I could use coosa blue water 26 for my deck to replace the 1/2" plywood core that was in there prior. But, if there another core that...
So the deck of my sea cat is getting spongy in some spots. I plan to just cut the top laminate off the sole, then remove the bad wood core....
My hatch has succumbed to the elements. I plan on using a sheet of coosa for the repair the same thickness as the old ply. I plan on removing...
I would like to know what you guys normally use as the last layer of glass before pulling fairing compound and blocking it out. It seems like I...
I just bought a 1985 222 CCP aquasport. The front deck is soft due to a poorly sealed hatch. I would like to fix the issue, but I have a...
I am putting my stringers back in my hull pretty soon and I wanted to see what should I be using to add to the resin to thicken it up so I can...
I have a boat done in white gel, and I would like to apply a different color gel coat over the old gel coat. Besides sanding and wiping down...
I am redoing my stringers shortly and I was planning on using 6" 1708 tape followed by 12" 1708 tape to tab them in. I would then use a single...
I am replacing the transom in my hull and the area was sprayed with gel coat, that I assume used wax to get the surface tack free. The repair was...
I need to do some glass work before my arjay goes bad and it looks like it will be really cold when I am going to try to do it.
Could I use the bondo hair for fileting?
I cut out the inner skin and will re use it so I Can pour in an arjay transom. The question is I have some woven rover and wanted to use that...