i havnt given up i today was a good day.... took off the motor for this trip, small place and socked with weeds anyway. the r/c props dont have...
sorry for doubting your suggestion wildwatson. i think a different prop is needed. i cant seem to shave enough off to get good rpm's. on top of...
after see those i think i need 12 more motors in sequence... then ill be satisfied
is that real? if so does it haul grass?
and i need to deflect the exhast, or maybe not, the heat might be nice when im in 25 degees next saturday morning, killing the +hit out of the ducks.
yes and the prop is too much for the 1.1 hp 28cc motor. it was running too low rpm's just above cutting out, so i shaved 1/2 inch off both blades....
i used a small piece from the clutch spring to connect the two throttle cables. threaded the cable through like a key ring
i dont need any comments on my welding ability
finished enough, might need a skeg
that is hilarious.
its worth a try, but i think 28cc would be too much gun for those little things,you dont know til you try. i just went with what many other...
in ca there is no registration required under 4 hp. i used a youngs t 10 because it turns in the direction of the motor. if you use the gear head...
three limits allowed in possesion in ca this year.... hunting excursion here i come
thankyou for all the insight i have spent many hours looking over the 94 pages of this thread and it helped tremendously. now here is my 2 cents....
