Hey, You said that there were glass SMC parts similar to this. Perhaps you know the thickness of these parts? If you build up a similar...
Scphantm, As a rule of thumb, I usually say that I want the same amount of resin, as I have glass. Since vinylester is approx. 10% heavier than...
The thickness of the materials is also important to keep in mind. If for instance the wood would have a thickness of 0.1 mm, and the carbon would...
You could have used the pump as a bar instead of a stand to show stuff on...
Been there, done that. Unfortunately, you didn't seem to have a lot of time. I guess we'll see eachother again soon. Cheers
Sorry, I didn't see / forgot that it was concerning the mold. I thought it was about the hull. Sorry for that. For the mold, go with balsa....
In my opinion, I would recommend glass as well. Whether this is E-glass or S-glass, it wouldn't matter to much I assume. The material properties...
The shear modulus of a balsa 100 kg/m3 is around 110 N/mm2. PET (Airex T92) will give you a shear modulus of 21 N/mm2.
Herman, Why go with a balsa core? In my opinion I would always ago for a non-wood, closed cell core when possible. If would look for a PVC or...
Thanks for your quick reply. We tried this before but the results weren't as we hoped. I'll try again and use several different options and...
Dear Sirs/madams, We, at our company, are currently busy building a boom for a large sailing yacht. The designer has drawn and engineered the...
Hey guys, I'm am sorry to say, my thread was a mistake. While I was writing it I decided to go to the teacher and ask him :P Accidently I...
Hi y'all As I wrote before, we are designing an offshore support vessel. We thought we finished drawing the lines plan, but according to rhino...
Yes, but when you use splines this will be quite inaccurate. I found out that you can differ the number of points rhino exports with in the...
Hi you all, As a 3rd year student naval architecture in The Netherlands, we have to design an Offshore Support Vessel. The prelimenary...
Hey guys. Haven't been here for a week. During weekdays I live in Hilversum, a place near Amsterdam in Holland. In Hilversum I have no internet...
Looking back at my cat period; We had a trailer for on the road and a 'beach trolley'. The cat ways in at approx 180-185 kg's, is 2.60 metres...
You're close Slowmo. If your boat would always sail upright, so without any trim (transverse) it would be better to have the CB in the middle...
I do not understand you can keep talking about something so easy so long. I think it is clear: If you are sure that the local designer makes...
Okay, I read several threats on your forum 'bout this, but I want to hear your opinions. This because I last had a little confrontation with one...