I am currently marinizing an 1.9 TDI http://www.boatdesign.net/forums/diy-marinizing/vw-audi-1-9-tdi-marinization-52760.html#post732663
Hi Ben2go, i tried different props, made no big difference in low Rpm smoothness. The prop that performed best was the one that originally came...
somehow the video link does not show up in above post: https://www.youtube.com/watch?v=UKsXV9Qdnq8
Tested the TDi engine with mechanical injection successful. The little four banger could push the 25foot boat to plane with five people on board....
Hi Steve, opened a new thread here: http://www.boatdesign.net/forums/diy-marinizing/vw-audi-1-9-tdi-marinization-52760.html#post728501
I am working on a Marinization set to connect a VW TDI engine with an Mercruiser outdrive since a couple of years now, my target was to cut no...
Most marine Diesel engines originate from automotive applications. Main difference to their automotive cousin being reduced power for an extended...
Hi Steve, SDI is the Non turbo version = Suction version of the Direct Injected VW Diesel engine. TDI is the Turbo version of the Direct...
Hi Steve, SDI is the Non turbo version = Suction of the Direct Injected VW Diesel engine. TDI is the Turbo version of the Direct Injected...
Hi Steve, thanks for the reminder, was busy with other projects. Just posted an update on http://forums.tdiclub.com/showthread.php?t=413125 have...
No of course not, but i am sure it has been tried. I was more thinking about in the middle of the Atlantic with a 1.9Tdi powered saildrive,...
I agree. if the 9mm pump from an IDI 1.9 Liter (from your example) is used max output will be around 100HP. But if a 12mm plunger Cummins...
Thanks for your quick reply, i cant follow your argumentation entirely. Any Diesel needs to inject before TDC. 1.4mm before tdc (measure at...
Why does the power level of the m-Tdi engines drop sharply to your opinion? Comparing Dyno charts between mechanical and electronic pumps id...
I can agree on the R&D time you will spend, i am designing a marine set for an 1.9 TDI it starts materializing after more than one year:...
I am currently tooling an complete marinizing set with wet exhaust manifold for the 1.9L ALH Tdi engine. It will run based on a mechanical...
