I did some experimenting yesterday with a couple of pieces of scrap Plascore. The pieces are leftover cuts from stringers going into the 25 T...
Question for the paint and resin experts??? I am rehabbing my 25 Terry Jason lobster boat. The helm dash is reconfigured and I have a...
I rebuilding a 25 foot lobster boat for recreational use. Over the fall and winter I removed the back deck and removed everything except from the...
As I go forward with my rebuild/rehab/repower of my 1989 25 T Jason lobster boat, I'm getting to the point of laying up and glassing in lateral...
Nidacore layup schedule Hello ALL, I'm a bit new to this forum. You helped my out with suggestions on epoxying some limber holes. As I go...
Curious, I have to drill a couple of limber holes through the new stringer pieces on the 25 T Jason. The limber holes on the old fir...
Hello, ALL, I have an older lobster boat with a solid glass. I am doing a refit/rehab/repower and need to fill two or three holes in the...
Hello all, I have 2 or 3 questions. This is my "1st time" fiber glassing and I'm doing some testing of my skills or lack of finishing some...
Hello ALL, I want to do some experimenting and testing my skills, if any, in fabricating some foam panels with a decent roll on gel coat...
What material is easiest to use for a 3/4" panel with a "round edge"? Nidacore? Coosa? Penske? Other? I'm doinf some experimenting with...
Hello, I am new to this forum. I am contemplating having built and then finishing a boat kit this coming year. 30 footer, solid glass hull,...