I used only one layer of 17 oz biax over much of the original ply skin, so am adding 3 more layers, for a total thickness of 3/16". The design is...
YES! That was the protocol I was attempting to describe in my original post, starting this thread. Thanks so much for reinforcing my plan..
Hi Jeff, Yes, you are describing what I plan to do, to some extent: but now, applying what has been said by all 9 of you, I will proceed as...
Hi, Thanks so much for your comments: yes, that is about what I plan to do. Please see my reply above to "fallguy", for more about this project. I...
Hi I appreciate your concern, and agree - from experience - that 27 oz biax doesn't wet through, when stuck on, and smoothed out, on an inverted...
Hi, Yes I am going to have to apply 3 layers of 17 oz biax/epoxy to the entire underwater area of my composite one-off, hard-chine cat after...
Yes, I have a gorgeous 1 bd apartment direct on the Gulf free rental for someone who: -can demonstrate skills in woodworking, fiberglass , and,...
Hi Fallguy; There are some cruising cats with double bow anchor rollers, but what happens ( when both anchors are set, say at 60-90 degrees to...
[ATTACH]
Hi Gonzo; I have been reading your posts for years - you are someone I respect! No, those prices are what I have been able to pay for the stated...
I have been a multihull builder since 1976 . I want to transfer my skill set concerning construction and restoration of composite multihulls in my...
Thanks, Mr Efficiency; that definitely helped...BUT, the fotos wer ALL upside down when I uploaded them!? None of the icons above allow me to...
Ok, Mr Moderator; I finally figured it out, but I still dont know how to actually add images to my posts on BoatDesign.net???Is there somewhere I...
Thank you, Mr moderator!
BlueBell; I just tried to Personal Message you, by clicking on your name, but got only "Start a New Conversation" // How do I - fellow gizzer -...
Hi Catsketcher! Its very encourageing to me to be able to get advice from guys like you and BlueBell., et al, as I'm basically going it alone here...
Hi again, BlueBell! Since your last - encourageing = reply I have ordered 4 garage door extension springs, which have a rated pull of 125 ft #s,...
Right, Fallguy; I did another round, using Gerr's chp on Crouch method, of calcs for a target speed of (conservative, I know, but I dont have...
Right, Mr Efficiency; we had to use our Chrysler Sailor back in the day to get out of tight spots in turbulent conditions, so I definitely want...
