I measured it with a decent caliper. od is 1.9 and wall i s .15 or .145. Now I am thinking that I was off about the post being 1 7/8. That...
I am back at it again. Finally took my rudder completely apart. The post is shot. The post is 1 7/8 inch OD and about .15 wall thickness. 49...
Thanks again. I think I get the idea now, LOL. Appreciate all the help. Will post a pic or two.
I see. I should have said biaxial.. I have all the West info and feel confident that I can do the repair. I have done similiar above the...
I have removed a 2 inch diameter thru hull fitting in my fiberglass sailboat. The hole is underwater and the hull is ½ inch thick at that point....
Gonzo I thought of that. But would t hat not create a bump in the lower skin. I worry it would cause the new core to push up.
see how this works. BTW that big hole was there, lol. The bottom skin is thin. I will need to laminate a layer or 2 from below. A job that wont...
There should be a picture attached. The fore deck removed is about 3 X 3. The glove thumb is where the windless was bolted. See the 4 bolt...
This is my first post so I dont know if this is appropriate, since it is about repair. Is that subject appropriate here? I have a 40 year old...
