Can someone please give me some estimated weights of outboard motors from 70hp to around 100hp? Thanks cvl
Willallison, it is about 58% of the waterline length aft.
One more thing, the books I have, only have rough calculations for determining the Moment to trim 1 inch, and it says that the estimation is for...
Wdn, Not really, the freeboard is around 12" at the transom. It is a center console bay boat. It is all flat deck space on top, with only a...
Yes, the LCB is aft of amidships: LCB = 30.25 inches aft of amidships LCG (Rigged with three 200 lb people on board) = 29.26 inches aft of...
Thanks, Steve, you make a good point, which is what brings me here. I know how to do all of the calculations, and have done so, but I am away...
Thanks for the speedy replies! With such a small moment arm, I wouldn't think that it would trim very much. At least not compared to a 200...
I forgot to mention that it is a powered, planing hull.
I have designed an 18' hull, an when rigged out, the LCG is located between 0.5" and 4" aftward of the LCB. Is this going to create a problem?...