These curved transition from high to low pressure may generate a big vortex
If I can get to align the center of pressure of the sails with the paravane force then I will not need deep regulation
Now I understand the drawing . These open and close. When close pulls down.
Juan lacase is 25 miles from there.
The tension on the cables to the top is almost 0 when is upright. If you compare the compression with and without paravane on flat water is less....
Colonia del Sacramento , Uruguay.
Yes. The rig and the entire boat designed for normal operation.
Where you connect the lines? You are the one who is working on a kite boat project? ?
I will try to control the force from the boat independent of the surface and depending of the list of
Very interesting information. thanks
I think the foil is designed to work at full ventilated mode at high aoa like these proyect on the seventies that use skies on jets to take off...
I am trying with surface piercing floater (bottle) to regulate the high. Another problem is the pitching. That make the foil varies the speed. Do...
I made new one with two diferent point separeted verticaly. Sea trials pending but the cuestiĆ³n is .. Why these kind of divice is no popular?
Righting moment. And the boat do not need any modification. the righting arm is the whole mast. The problem is when it jump from the water .
I am trying a paravane on a 23 feet sailing boat. I found 10 ways that do not work. On YouTube there is a video " velero con foil " any sugestion?