we were able to get abuot 12 layers on about 2/3 of the repair we aare doing abuot four feet of it first and the will move the blocks to finsh but...
sounds like thats the way to go i think we will only lay up one layer at first causeit will be such a big piece and i guess we can sand between or...
another question i dont think i need to re gelcoat after using fairing putting do i just cover with epoxy resin and barrier coat
most of the glass came out of the point of gthe keel we thought we should build up strips on the keel first and then go around and up the sides...
sorry i dont knqw why the pics post sideways
the problem was not an old repair it was knocked off the poppets by a drunk driver onto the hard its 38 ft and unfortunantly i can not turn it over
we are also in a few spots down to the new glass we did on the inside
got all the loose stuff out just have to taper the edges we have places where we took at 3/4 of inch but we are down as much as we need i guess we...
some pics of damage not done grinding yet is it possible that the old polyester was not bonded good originally and how much damage would be ok to...
thanx par should i do 4 at atime let it kick then sand or keep going just as it kicks and i will get some pics up by weeks end thanx
finally got to the outside we are grinding alot of material espesially along the keel to get to good glass as much as a half inch or so im a...
trying to get to the outside when it warms up some ive been researching on ways to hold the glass up on the bottom im hoping someone can give me...
finished laying up inside more grinding outside next week we hope
today was snow and 32 degrees so even heating i decided to wait
thanx par just trying to finish the inside tomorrow will be 45-50 so with heat inside i should be good then i will tent the outside
what temp would be minimum temp for marineepoxy i was told it will restart curing process when temp comes up but will the bond still be optimal
thanx for the info paul i went to milford high also class 81 but this is a bigg boat
one more 2 of the bays done 2 more to go then outside as long as the weather holds in the northeast
some more glass laid up inside 4 layers on floor 2 up the ribs does it look like im moving in the rihgt direction and just grind out more outside...
two more
