Hi tunnels... Well transom is in :) ive also made all the stringers to shape and size rounded the edge and just finished sealing them about 10mins...
I was thinking with the bulkheads to use get everything setup and aligned and screw the bulkheads to the stringers to keep them all exact square...
Hi tunnels. I glassed the transom in over the weekend. All went well i also made some bog filler and put that on the bottom of the transom inside...
Frosty when i mix accurately i use the kids medicine measure cups as we have a million of them. Also for a tip, 1ltr is 1000ml so 1% = 10ml as...
and wood shavings?
also aerosil is extremely expensive here and was told i can use sawdust from the local wood yard. It this correct? Aerosil is $300 for 5kg...
will stick on some pics soon. I need to know the mix ratio for sealing mix for transom and stranger priorr to setting them in and also the mix...
Hey all. Just a about mixing ratio for the resin for sealing. I want to seal the transom before i glass them in properly later today but cant...
Hi. I will get a photo on when i get home from work later today. Ok glass i asked about the glass between the boards. Also would you...
Hi Tunnels, for No.4 I have 450gsm course. i was gong to do -------------- Boat Hull transom --------------- Resin ----------- Board ----------...
Ok people. I have cut the transom boards, 1x18mm and 1x15mm and the stringers. I have a few q's before i start glassing on the weekend. 1....
Hi Tunnels. Would a 50x75mm structural uncoated pine piece of wood be ok for the keel as i can get that in 6m length and in one piece so i dont...
Tunnels. Just a couple of q's (i need a break from the hammer and chisel getting the old bog out..... im surprised i cna type with my smashed...
Nice work... It makes sense now. like you said, that will keep me busy a little while now. :) Cheers
Hi Tunnels. Thanks heaps for all your knowledge input, i wouldn't be doing this by myself without it. For the stringers i cut the 2 upper...
Hi tunnels, What height would you recommend for the stringers, the the end highest to the floor can only be 65mm, the next 166mm but the next...
Hi tunnels. Ok i think i got what you was saying and when get home will digest it and repeat back for your confirmation. I will try a chisel out...
hi tunnels. I have made custom sub boxes for a friends car a bit ago and helped a friend make a fiber box so have a fairly good understanding...
Some photos of the hull cleaned up and ready for the stringers. from the back of the boat to the beam going across its 2.95m then the cab after...
And off we go again. Ok i have purchased the wood and its getting delivered tomorrow which i want to make the stringers and bulkheads over the...