the pump was only a puny 60psi as that is the maximum for the unit. yeah i will try and flush with fresh water to revive it failing that new...
Excellent thanks chaps loads to go at there. Is it possible to unblock my domestic RO membrane? It stopped outputting water after a few minutes of...
Hi I have recently blundered into trying trying to desalinate seawater with an RO unit. Didn't realise domestic RO is different to marine so it...
fun looking project! i plan to attempt something similar myself at some point as the trolling motors iv tried are useless and decent electric...
I like the idea of having a swimming platform or aft cage for safety and comfort, so I figure it makes sense to combine that with the aft sprit...
I did use the term aft sprit as it seems appropriate, I'm self taught so there are gaps in my knowledge, I think we understand each other though!
ok im still not decided on whether cable shrouds or solid frame area stronger. i guess shrouds would offer a little flex which is better than a...
i have for a while studied yachts leaving and making port to see which sails they raise or lower first. i have witnessed vast majority raise the...
Hi Angelique you have a very valid point. im keen on the idea of separating the heads of the 2 sails but there is weakness in the frame at the top...
Concept frame rig heres my outline for a steel frame rig for the around in ten challenge. Thanks to Sharpii for encouraging me! i see the...
Thanks Brian. I had a browse through your post and ended up taking a few tangents, lots of reading to do!! I'm eagerly waiting your new rig...
Hi sharpii, I like your designs. I would opt for very similar keel and rudder. Please don't see my sketch as a design, it was just to represent...
Rig ideas hi well this thread seems to have gone quiet since Yrvinds exit so i thought i would throw in my tuppence worth... i have been quietly...
The outside is exposed to the elements, salt, water, scrapes ect... The inside is exposed to none of these and will be sealed and insulated from...
ok so im sold on the idea of sandblasting the outside and epoxy paint... the inside will be less crucial but more difficult due to nooks and...
Miraculously understood the maths reference :) im informed the orginal paint was done properly and looks good on the outside, but the cranelift...
Got the engine started today, its seems in good condition and turns over at low revs nicely :) Yes it has heat exchanger with air intake/ exhaust...
thats a bleak apraisal! it has been sitting 3 years but is picked up on the top of a big tide if that makes any difference?! if it needs some...
Par it has occurred to me! but committed now so just need to get it right. luckily the outside is mostly rust free. i will remove ALL exterior...
im in the right place then gonzo :) so first thing i do when shes on the yard is go at the hull with a pick axe... eek :p Mr efficiency you think...