I have a 36 foot cabin cruiser and want to install a windlass. Wondering what would be an adequate one for the boat size? Will it be able to use...
Is there a rule of thumb with regard to shaft clearance in a steady bearing? I have a 1 1/2 inch shaft and the bearing gets very hot. Just ran new...
I have a jack shaft with universal joints on each end, one end coupled on the shaft and the other coupled on the transmission. Do I need some type...
My question in the previous post should have read. Is a 4 foot distance too far without some type of a steady bearing? The hp of the engine is...
I have a 1 1/2 inch stainless shaft in my boat. Wondering how much distance should there be between supports. Is 4 feet too much with a steady bearing
Another question relating a thrust bearing block I have in my boat. I just poured new babbit in the thrust bearing, the ball bearings and collers...
The thrust bearing block that I have in my boat is fairly old. I just recently took it out and poured new babbit because the shaft had a fair...
Thrust Bearing Temperature The thrust bearing block that I have in my boat is fairly old. I just recently took it out and poured new babbit...
Hello To keep my engine low I am using 2 universal joints joined by a short stub shaft, with a thrust bearing block. My question - What...