The method I have seen that seemed to work well used some rubber standoffs combined with a flexible sealant (sikaflex) for the glass. So like you...
I have been thinking about making some new window frames for a 28 Bertram and was curious what yall thought on how to best build them. As it...
Im no expert or even novice as you can tell so I think I have used the wrong term. What I really want to see is the fluid movement but as you...
I was asking for a video. ;) Below is something similar to what I was looking for but wanted to see a inboard shaft driven setup. From the side,...
Inboard Propulsion Video Search I have been looking for a video showing a inboard boat running from underwater so I can see the props rudders and...
Thanks for the reply. I looked up your posts and yes you have come a long way and with some pretty extensive modifications. One thing I want to...
Are there any companies that still make or recently made a smaller Flybridge type boat around the 30' range. I have a 28 bertram and am always...
I need to refinish two engines that will be in a boat used in salt water. They are Cummins 4BT's and have some rust and peeling pant where it...
Thanks for all the great replies. As to the Carolina Flare... Dont worry Ill put that idea in the trash. Everything looks easy on paper until...
Thanks for the quick reply. Ill try the soft pad on the grinder and see how that goes. I have a smaller air angle grinder that would work good...
We have had a project boat sitting around for maybe 10 years and I want to do something with it. The hull is very dry now and has a good bit of...
I was looking at some of the products like the Smart Rails and was curious how beneficial these would be in reality. Its pretty simple to see how...
After reading over info on the IPS and Zeus systems again I was curious how much research was done on a enclosed shaft and dual props on one...
I was curious if anyone has made a hybrid of a deep V front part of the hull with a catamaran type rear. By that I mean have it flatten or raise...
I was looking into window designs on various boats and came across two main types id like some info on. The first is the normal swept back...
Is there such a thing as a counter rotating shaft driven prop using the same theory as the VOLVO Duoprop? By shaft driven i mean in what ill call...
The 28 forum doesnt get much activity but im a member over at the 31 board and there are some great guys there with tons of knowledge. They have...
I have a 28 Bertram that we have had out of the water for a few years without power. The engines we have but never installed just don't quite cut...