I guess there won't be a build starting after all... Checked out the new prints and the problem was not fixed.. Ed repaired the drawings at the...
Trying to decide on doing a strip version, or foam fiberglass. Any thoughts, wanting to build light...
671 days ago I started the build, but the lines were wrong, so I wrote to Ed to let him know the problems. I think he thought I was maybe a first...
Would be very interested purchasing B28 plan set... Michael@ Alamo-45@hotmail.com
Thank You Paddy, I've been landlocked for 2 yrs now, it's time to go back to sea & cruise, not getting any younger you know. I thought about going...
Thanx guys At this time I'm doing a refit on my Haida 26 and will be heading to Abaco this fall. Just need to get away for awhile and put more...
Time to quit...... I am very dissapointed with the design, I will never build another boat that has'nt been previously built. Just to many...
Yes, came w/ the plans. The long water line bows are built different than the clipper bows. I'm not sure that I'm happy with them though. I'm...
I agree, but Ed calls for a 3" radius. There is two watertight bulkheads, making three separate chambers. I also added lighting holes with in the...
Well, the world didn't end , so will keep on building today. Let's get this second layer of skins on.......Michael.......
Rick, I should be around 50 hours @ turning the hull. I think using foam will be about 1/3 of this.. Cold molding is a Little more time consuming....
Well the first layer of skins are on. Will start the 2nd tomorrow if the forcasted blizzard isn't to bad to get off the hill..... Michael..
I met him at the wooden boat festival at port townson in the early 90's. He will be missed............Michael....
sheeting Didn't get much sheeting done yesterday, some how popped my shoulder out and had to stop for the day....Go figger...
Webs Got the webs installed today. A little fairing tomorrow and then the sheeting will start.... Michael..
Two layers 3mm- about 1/4" w/ 2layers 6oz. glass. Using Areo-Marine resin, I really like this resin. I don't have my info here at the house, but...
Keel progress Today was a good day, layed the keel, will trim and fair tomorrow. Had to laminate the stern section had to be laminated, was just...
I can't get back into this blog to add anything, so I'm posting pic's on this forum..Michael.. Hope more tonight.....
Back to work Back on the build, all other jobs now out of the way. Will be laying the first ama keel tomorrow, then the webs and wala, start the...
If, the world ends on Dec. 21, 2012. You won't have to worry about a boat...
