example of result:
i missed the thread, same thoughts some years ago. not advanced enough for specific purposes, i think. I struggled with delphtship to get a...
http://www.tsca.net/johngardner/lastchance.htm This is realy a nice boat, the 2nd chine curve is peculiar. It doesnt look like especialy good for...
I did not any fairing inside delftship. Because i did not get the shape i want (without hollows) with few control points (and curves) with hull...
This kind of undertaking is out of my skope in the case for this boat, but in avoiding hollowness i did something similar, i didnt use a formula,...
I was not fast enough, please dont use this file, or use it but correct the LOA to the value LWL is in delftship before usage, its in a line...
Yes, i uploaded the wrong file, where these two lines are missing, sorry. here both hulls as .mlt, both should work now, and hydrostatics from...
This is exactly what i did with hull 3 in comparison with hull 1 and yes, it was about can michlet show differences or not. hull 3 and 1 share the...
As i am sailing a 470, i want to say, that unballasted craft like every dinghy has to be sailed allways upright with no heel, else you are not...
So if these "strange ends" are not a sign, that something is wrong, here is the diagram comparing hull 1 and 3. Edit: hull 1 is in pale color, 3...
i will try to improve my spelling, i mean vertical not fattish. I decided, not to get off the holloeness of both hulls, 1 and 2. Just forget...
Its bad about for you not getting enough of what you expected, but maybe the things you do are special, and there are not a lot of people around...
thats true, and in contradiction to my statement in my former statement, it might be easyer with other design methods than with delftship. i...
To prove that, i did a second modification to the originall hull. The original one is called 1 (or ps2_1) in the attached files, the modification...
The .fbm file should be attached to the my first post, after the .jpg and the .pdf Does michlet take for the resistance calculation the value...
I tried to work me in this program, after smal starting problems (one line missing in the in.mlt file from delftship, maybe of my version 3.20) i...
Sorry for forgetting the dimensions. LOA = 5.7m = 18.7ยด(stations are 0.3m = 11.8") BWL = 0.9m = 35.4" BOA = 1.3m = 51.2 " displacement (at...
Hello, i read several threads in this forum, and after reading this one:...
nothing new from nvc? Hello, i read (nearly all of) this thread during a quite day over christmas and was very impressed, both of the...