nobody? I know a bunch of ya'll live a lot closer to that region than I do.
I"m going to be finishing my summer abroad in rome on roughly august 10th or 11th. I'd like to join a group on a couple day sailing trip. I've...
I'm studying abroad this summer in europe. Flying into barcelona on the 14th then traveling for 14 days then I'll be in seville for 3 weeks. then...
If I go the stainless route, how much of an issue am I going to have with coorosion if I skin the underside with aluminum?
still the same problem of getting someone to tig weld it
building an 87 vindicator. to the point of building the engine bay cover and rear seat. I didnt' like the old closed up crowded style and 3...
find a local plastic dealer, I"m thinking the bucket idea has some merit to it. There is a chemical (glue) used on industrial plastics that...
well guys I didnt get any responses in time so I went ahead and made some filler out of the resin and micro balloons I had. Just wanted to same...
ok this is kind of offtopic I guess but relavent. I'm building an icebox to go in the floor. The unit is insulated with rigid foam pieces I...
most art and drafting supply stores carry them
I don't have any microbaloons either unless I don't know what they are... I have fine sawdust from rot-doctor that the previous owner bought when...
no I"m actually not looking for someone to tell me that, I'm just trying to soak up as much knowledge as possible here. just trying to get a...
ok I"m prepping the transom of this runabout (glass boat) for paint since it's a little rough looking. The previous was rotted so the previous...
so why use epoxy on repairs? such as stringers and such if it dosen't stick to the polyester as well?
so are most boats manufactured using the poly resin or epoxy? if a switch roughly when was it? and if epoxy and poly resins don't stick...
I"ve been using epoxy on my runabout I"m redoing the stringers and transom in. Can I use poly mixed with the fine sawdust for the fillets and...
I'm buying a 1987 VIP Vindicator, without a motor. (had a Ford 460) Guy has the carb that goes to it so that's not an issue question is, if...
