The Romany is not demountable. It is capable of being permanently 'assembled" near the water after being build in another location. Richard told...
One is being built in Ireland I believe. On the Bolger boats Facebook page. My concern is how noisy the wave slap would be on the flat bottom...
I have recently purchased the 1985 Spencer 35 named Sagitta that was built I believe by Simon Willis in KeriKeri. I’m told the original hull...
Yes that's it. Obviously built with an unlimited budget. Now beginning to decay on the beach. I guess it could be 30' maybe that includes the bow...
There is a tacking pros/outrigger here in Fakarava. Not quite sure what it's for, I'm guessing a guy made a bunch of money on pearl farming and...
I fitted one this spring and really love it. Have had other brands made in Europe and this cheap "eco temp" works far better. It runs on its own...
You could try: MoJo life at sea / on Facebook, my wife's site.
Rob Just read your email RE the fast uncomfortable sailing. My cat is a bit like trying to sleep in a luge when you get above 10 knots. Had water...
Just got back from a winters cruising on my ply hard chine cat with 3 stay mast. (Downwind whenever possible) What'd I miss?
Success (sort of) So the dinghy goes well at full load close to 700 lb total and 9 knots with this 4 horse I bought for $100 in Georgetown,...
Did not realize you had a wood now beam, that is a concern. The inner roller location is OK, I just figured my catwalk was a bunch of extra weight...
Charly I originally had something like that but am now putting a roller on the front beam AMD gotten rid of the catwalk. Guess you need those...
A few more trying the 3.5 to save overall weight. Boat is super stable and I have run thru some pretty big wakes on the intercoastal and not...
almost done So I nearly have her done. Just the interior/deck paint and hatches and a few padeyes. Weight has gotten away from me and will be...
Nice looking little dink. Certainly better than other 8' designs.
Making some progress Weather has been good, so no issues working without a cover. Now also have both hulls glassed. Plan to weigh it tomorrow to...
the designer and builder Mark (plans on an earlier post) confirms the performance. Cotemar originally claimed the boat did 15 knots with 4 aboard...
here you go As you can see, I've followed the sage advice and connected the bow for a nice fendering surface. Might cause me a bit of extra drag....
I guess that explains the difference between the look of your dinghy now and as built by Mark. I will have the pointed bow as it has to straddle...
the first few pieces Here are the first few side panels of the final boat. I'm hoping to get the last small inner side partially from the same...
