I don’t know a lot about what happened so bare with me. boat has a composite floor. Corecell 1/2” A Maybe 36oz both sides ish Sides were 1/4”...
Good day, I need some help with a project. I have some left over foam, A 1200 corcell Id like to use it for a planter box. My question is can...
I’ve had the aluminum version 1648 and it’s worked well for what I do. I’ve since sold the boat and need to build myself a new one this time...
I have some 1400mmx450mmx12mm corecell A 1200 cut offs i^d like to laminate together.What is the best way to join the long sides together?This is...
Ya I know nothing to do with boat building.Since boat builders are such handy type people was wondering if anyone had experience with making...
I have a large 20x20 pad that i wish too re paint. Some of it is peeling off but most is stuck quite well. I notoice the local HD has stripper at...
I was going to try to cut the grooves my self,1.5mm wide similar to some samples i have from Diab. seems the resin would flow quite quickly...
I would like to paint these plastic nailers used for suntuf roofing panels....
Not boat related, I'm building a covered deck with dimensional wood and the main beam is a LVL laminated vernier lumber. It has some grooves in it...
The wife has me building a cabinet for some off her dishes, we have some left over paint and primer from another project.Surface is plywood with...
Why is double bias glass stiffer in one direction compared to turned 90*? Thinking the fibers are 90* to each other the stiffness should be the...
So I've built a full size model of my boat from 1/8th hard board sheets.My plan is to now make a mold of the sides so I can infuse both sides of...
This subject has been touched on here and there so I thought it would make a good topic. I understand wrapping tyvek around the vac lets the air...
Thinking ahead and before I glass up my sides I was wondering what may be the best approach to attach inner and outer gunnels to foam?They'll be 1...
I've picked up some Ve resin to try out,Derakane 411-350.Supplier told me 5 drops of catalyst per fl/oz(29.5ml). a search on the net has a range...
After cure of my Infusion samples I;m amazed at how thin they are compared to wet bagging.One sample was 4 layers 400g double biax,infused...
Over the holidays I'm gonna try an infusion test to get my feet wet.I have everything(I hope) that I need but I have a question.I have some enka...
I tried running a search on S glass,no go,not enough words it says? I'm sure there's info on it,what else can I type into the search function?...
I've been searching the site for single skin epoxy and not coming up with much.Any advise on key words I should be searching?I'm sure the info I...
With the completion of my little boat and some river miles under her now I have a question about the foam.I've floated over a few rocks put some...