Just wondering if there was a program out there that is geared towards the race enthusiast for making modifications (slight change in hull design,...
Hey Jeseh. i am currently looking at Glen-I and Clarke for 13 footers. Both places have race standard runabouts. Nice to hear that you are...
As a first stab at boatbuilding, i was thinking of building a small race-style, outboard motor boat in the 12-15' category. What i am looking for...
Just wondering is there are any books out there with good info on how-to for vacuum bagging techniques. i have most of the basic boat repair...
great observation Hey Willallison. The rule of thumb for outboard setup on a bracket is install them with the anti-cavitation plate 1 inch above...
brackets in reverse i pulled this explanation off of "The Hull Truth" about why boats with brackets installed do not manuever well in reverse....
Hey Gonzo. i think that they go poorly in reverse cuz the prop is extended about 26 inches farther away from the keel. Just my 2 cents. Thanks...
Hey Gonzo. That is a great point. Luckily, the boat i am doing, a Formula 233, is a common project boat that is usually converted over to an...
For my next boat restoration (which will involve an ib/ob to o/b conerversion), i was thinking of making my own motor bracket. i will probably...
i am just getting into boat design and boatbuilding. i would like to build a couple of small boats (11-15 ft), and then we would like to build a...
Is anyone familiar with any type of foam rod supplier? i am thinking about trying to design a fiberglass or graphite T-top for my boat. It is...
i am about to order a new laptop and i want to make sure that it is powerful enough to run Prosurf. So far i have put together a Dell with a...
We would like to design a 24 foot deep v hull for use as a small craft sportfishing boat, something like the older Formula hull. i was wondering...
What would be the logical way to design a 24' boat to be used for offshore fishing? We were thinking of just making a mold from an old Formula...
For the engine, i wanted to get an outboard that i wold eventually repower. BUT, i am about to go look at a 1976 Formula 233 that has a 351 Ford,...
i am looking to initially invest $10000 to $20000 on a decent hull. Hope that this helps. d
i am looking for a pre 90s hull that would make a good rig for chasing tuna off of the California coast. i would prefer it to be trailerable (21'...