What?
I just need the thickened epoxy to fill the hard corner where the bottom of the plug meets the flange board. It's not for a Boat. I could...
For I plug I want to spread thickened epoxy along an edge because the fiberglass cant quite bend to the exact shape. I have heard of colloidal...
Yes exactly like that picture How would it lose that much power? I want to do this because I have nothing else to do with a vertical motor
Wax is so expensive
jeremy man bump
no one knows the answer to this....
I'm talking about for maybe a kayak not a ship, you could just pile up the clay on some plywood and when it shrinks 8% thats alright. Put some...
Thanks Jeremy Harris A very low cruising speed Weight of plane about 800 lbs as stable as possible maybe a tall 10" airfoil I dont...
yeah I cant find what I'm talking about because I have no idea what it's called
Instead of building a wooden mold, what If you just dug up a lot of clay and made a long compact pile. Then shaped the hull. Then you could wet...
I have a really nice new electric start 6.5 hp lawn mower engine. But it is vertical shaft. Is there like a 90 degree elbow gearbox thing I...
I've seen this on planes I think and hover backpacks Its like a circle that goes around the propeller almost touching it and the closer without...
Use a bmw 4cy the 1.8 from e30 (80's 3serise) or e36 (90s) they are rwd so they have no transverse gearbox or since your in the uk maybe the...
Yes, it needs to be carbon wich I have been getting for a great price on ebay. But the epoxy is killing me to buy
I figured that with this size boat bottom and at this weight it should only be about 3 inches in the water. Becuase 10dft/12x 3.5ft = 35x .36 x62...
maybe try using authentic carinuba wax or whatever that is heavy duty. Also Is buying pre preg material cheaper than buying the material and...
yes you could make a lot of them your self for 20k What I would do is get core of something maybe foam or pvc or wood, then rub it really hard...
Hey if I build a Carbon Kayak, about how many layers thick will it need to be if I'm using like 5-7 oz fabric psy and epoxy 4? What about if...
US composites seems to be the cheapest so far 70 bucks for 1.5 gallons of 635 thin epoxy, but 15 bucks shipping noooooooooooo Where can I get...