Hi All, Ive got a dual battery setup and have had to replace the crank battery as it died Silly me didn't take much notice of where wires were...
Hi All Its been awhile since I have posted on here Just to recap ive got a 21foot fibreglass tralier boat with a smallblock chevy 350...
Hi All, Ok so I am having gear shifting problems, I'll run over the background that has lead to this I had a Mercruiser MC1 that I up graded to a...
[ATTACH]
Hi guys Ive got a Mercrucier MC1 with a 4 blade stainless steel propeller that I need to ID It has AD2 and 774 stamped on it? Thanks Mike
Hi guys 350 inboard with no fuel flow Mechanical fuel pump with only about 20 hour's on it. Wouldn't think the pump diafram has failed Loose...
Hi all, Ive rebuild a 350 Chevy inboard as a few of you will know. All the teething problems have been telt with. Last thing to do is replace...
Hi all Been getting incorrect temperature readings at gauge on my Chevrolet 350 inboard These pictures show the stamped numbers on the sensor...
Hi all Never noticed this hole before Draining water while running It is supposed to be there correct ? ? Thanks Mike
Hi all As im sure some of you will have offered advice to my questions regarding the rebuild of my Chevrolet 350 inboard My question this time...
Hi All, Ok so I have a rebuilt Chevy 350. I’ve got a knocking sound and it seems to go away when I advance to timing. When the timing is...
Hi all, Oklahoma I've a Chevy 350 and would like to know if it's a vortec How can I tell ? This question has come about because I need to find...
Hi all, I got a 350 Chevrolet inboard. When engine running at different revs on the trailer there is no backfiring. Put it in the water no...
Hi all, Looking for some wiring advise. I have a Mercruicer leg with interrupter switch and a Chevy HEI distributor and am trying to find out...
Hi All, Im trying to narrowdown the year of my MC-1
Hi Team, I've just installed a new Mercury Gen 11 remote control and new dash mounted egnition. The problem I have is the tachometer is...
Hi all, I've a chevy 350 small block and I'm currently working on the timing. With the vacuum off and plugged and setting advantage timing to...
Hi all, OK I have a 350 Chevrolet inboard. It runs great however once it is turned off and left for awhile it will not start again. . If left...
Hi all, I've 2 questions about a Mercruiser MC1 leg. Firstly after removing the leg for maintenance I refitted it to find a gear lube leak in...
Hi All, The black wire. Does this get earthed or run back to battery negative terminal ?? Thanks, Mike.