I have a 90 hp 6 cyl mercury. Purchased new console with top mount and want to change from the standard merc side shifter. I dont understand how...
PAR I thought there were problems with MDO holding a screw
PAR Thank you for the reply. I made sure to ask if it was APA Exterior 1. No one here carry Marine grade 3/8 however, they do have 1/2 but that...
PAR, Thanks for the compliment, keeps me motivated. Im getting ready to buy the deck materials. My local yard has APA Exterior 3/8 Fir $25.75 and...
PAR, Finally got her back on the trailer. I have wrapped the edges with 3 continuous pieces tying in each side. Is this what you had in mind....
PAR Would you kindly take a look at the repair to the transom and see if you feel this is adaquate. I have 6 layers of tabbing on the inside and...
PAR, Sorry should have incl some pics
PAR, I have my transom made and finishing 3 coats of epoxy on it . My question is after setting it in PB should I cover the entire piece and...
Swade, Thanks for your reply. Hopefully PAR will respond to your post, but if there is anything I have learned from him Tabbing Tabbing and more...
PAR Ok I got it. I see how that is stronger, I have some 1/2 and we will do it that way. My Daughter who just turned 16, we work on the boat...
PAR, Thank you for replying, but as usual you are a few canted degrees over my head. I have lots of tools, a 12 degree canter is not one of...
PAR, Thanks I just might show up one day. This is my latest challenge I was able to get most of it out intact It was not attached very well....
PAR Better Pictures. Im pretty proud of that repair. Again thanks for your guidence Phil
PAR, I got 2 heavy coats of primer on her today, had to stop an take a picture of the repair. I just wanted to say Thank you again for your...
PAR, Finally ready for paint. After 4 barrier coats of epoxy is 80 grit to much tooth for some hi-build primer. It is a 2 part but doesnt say...
Knees PAR, Still sanding and filling and hope to get a couple barrier coats of epoxy on this weekend. When replacing the knees do you attach...
Attaching Deck PAR, While im sanding and filling, sanding and filling etc. Thinking ahead is it a good idea to slightly dish out the joints of...
No, she is a next door neighabor that saw what was going on and lent a hand and an uncovered foot. Her husband showed up and we moved her out of...
PAR, Thank you for your kind words. I would like to say to other DIYers and Backyard guys and gals who maybe watching this thread, or Googling...
Flipping the Hull You see a lot of guys tying boats to trees and everything in between, so I braced the hull and set up my Gantry. Attached a 1"...
