[ATTACH]
Don't apologize! Having a sense of humor is always a good thing. the elementor was a name off the top of my head because of how much chopping and...
Cut the Transom, Sun dried for a week and soaked the lumber in isophthalic resin and then laminated 1-1/2 on all surfaces. Also so sandwiched the...
I wanted the 17-degree deadrise and for the hull bottom I screwed the keel to a planned beam forward of the temporary mold
Longitudinal Stringers are measured and cut [ATTACH] [ATTACH] [ATTACH]
Project update Finished the big table Ordered the necessary wood to build the transom and stringers Began to sandwich the two layers of 1-inch...
Lamination Results Next step is to build a big work table, rebuild transom, and prepare for stringers. Thank you for following and liking my...
Lamination is Done ! The 1-1/2 oz strip I used was for a skin layer for the mold and then worked my way up the ladder of heavier fabrics....
Mold Positioning [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Finally got the wood for the temporary mold. [ATTACH] [ATTACH] [ATTACH]
Because I am working for underneath a canopy and when it rains I don't have the ability to stay dry I have had the pleasure of taking a break from...
Thank you !
I was questioning that myself, I visited a customized boat shop about a month before I started and seen they had chopped a boat along the keel. It...
Elementor means different elements that have come together to make one result.
You are correct, I should have been more detailed. Well in order for the hull to work with my design I had to cut it and stretch it by 3 ft and...
I was nervous myself but I needed the challenge in order to excel my capabilities so I took measurement twice and written them down, but the whole...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] I began to cut everything out and grind
[ATTACH] The first day When I got it home on cylinder blocks.
Hello, Everyone! I have been working on this particular design for about a month now and finally getting things done. I went out and...
