How do I adjust the throttle carb flap and the roller pin to the two marks on the throttle cam/flywheel? Is it possible to use the threaded...
I have a Johnson 1999/2000 25hp outboard on my boat,I am considering changing it over to a yamaha.The controls are totally mechanical (no...
Is there a set seat height for the front seats on a speedboat? I have a 14ft Broom speedboat (fibreglass)The swivel seats were mounted on timber...
I have a 2000yr 25hp johnson with a 10" dia-13"pitch prop on it. The boat is a 14ft broom speedboat with a planing hull. As an estimate I would...
My speedboat seats were on aluminium framed ply boxes (previous owner) They started to rot so I removed them.I have aquired tubular pedestals with...
I have purchased two new boat seat pedestals,they have a square metal plate eight inches square at the base.They have four holes in the base plate...
I have a 10ft rowing boat project on the go. On the water it planes easily with a 6hp Evinrude or is effortless to row.Out of the water it seems...
I have a Broom speed boat,the seats were mounted on ply boxes with angle aluminium screwed to the deck.They have stood the test of time,but have...
I have a 10ft,very stable fibreglass rowing boat. I am toying with adding a fibreglass sheet under the hull similar to the rib design. I believe...
The motor number is--J25 RLEEB I don't have much idea about the system,but there are 3 wires that are capped off on the engine.They come from...
New fuel pump fitted,seems ok. I had the carb off,cleaned and used carb cleaner,set the float,seems ok. It starts first pull,ticks over nicely,but...
I have a 25hp 1999 johnson outboard,I bought a new fuel pump from Hong Kong. The description they gave seemed to fit the bill.I fitted it,and the...
I was given the outboard along with a few other bits when I bought my boat. It's stood 2 years without me doing anything with it. The pull start...
I have a fibreglass rowing boat,10ft long.with a 6ft beam.The boat is very stable in the water. The Gunnels are soaked with water,which makes the...
My boat is an open boat,I've converted it for sea fishing,removed the rear seats for more fishing space, and altered the transom to take a...
One of my plugs has no continuity through it.When the engine starts it ticks over,but when I rev it,it picks up,misfires and then gets over the...
I have just changed the fuel pump on my 1999 25hp outboard. It is impossible to pull the engine over with the cord because the cylinders have...
I have a 1999 25hp Johnson,(J25RLEEB)it will only start if I squirt fuel in the carb. It will run for a few minutes if I rev it(not in gear)but...
I have a twin lever control on my boat,the engines are Evinrude and Johnson.(used seperately) I have recently purchased a 1999 25hp Johnson with a...
I can't find the part number or description of the bracket that fits on the outboard to pick up with the steering link. The motor is-J25 RLEEB....