How do I adjust the throttle carb flap and the roller pin to the two marks on the throttle cam/flywheel? Is it possible to use the threaded...
Much appeciated. At the back of GMH on Salmon st in Melbourne there used to be an old airstrip. Some great hotrod days and sprint days on there....
I appreciate your time and offer,but like you say,the postage would probably be more than the item. I'm not strapped for cash,but my idea was to...
Thanks mate,and I hope you have a good year. The cables on the boat are the ones I fitted (Teleflex)(evinrude/johnson) I've decided to get a new...
I am much obliged for your input guys. I think if I get a yamaha I'll buy the cables that fit. All the best for crimbo from Manchester UK.
I am in North Manchester UK My present cables have threaded adjusters and a clip over cup on the outboard ends.
Thanks,I'll call in my local chandlers and check. 'V'
Pic--[ATTACH]
Not sure of the difference.I fitted the cables myself.The outboard ends have a clip over cup with an adjustment thread.(external)
I have a Johnson 1999/2000 25hp outboard on my boat,I am considering changing it over to a yamaha.The controls are totally mechanical (no...
Thanks for everyone's input,it has been quite valuable."V"
Many thanks for your tech info,looks like I have found a solution. "V"
Thanks Bajansailor,I was thinking along the lines that you suggest.I would have had to add 3 or 4 layers of fibreglass on the deck,and make the...
Is there a set seat height for the front seats on a speedboat? I have a 14ft Broom speedboat (fibreglass)The swivel seats were mounted on timber...
Many thanks for your advice Gonzo
Thanks Gonzo,the outboard is a two cylinder. Looking at the chart the wot for a two cylinder should be 4500-5500. The engine has good compression...
Hi Gonzo,the revs are pushing 5500-5800 at full throttle.
I have a 2000yr 25hp johnson with a 10" dia-13"pitch prop on it. The boat is a 14ft broom speedboat with a planing hull. As an estimate I would...
I have acquired some large dia, deep fast thread screws that are used for screwing plastic together to fix the pedestals with.
Hello BJ, Yes,the baseplates are the problem,I have some galvanised steel sheet that I can enlarge the baseplates with,then drill more fixing...