Like to have this kind of wood result Do you know what kind of wood , and any varnisk, translucide gelcoat... thank you
Hello i love to put wood other aluminium structure any example ? like a wood roof other alumiun boat thank you
have a look here, it is the way i have learned https://docs.google.com/document/d/1shi95HnDfKk3TL8OgB9BUsEJO-Jk9Ld2fG8KfcFbruU/edit?usp=sharing...
heloo i took one of your picture in my post http://www.boatdesign.net/forums/multihulls/mast-base-oriantation-56821.html#post791821
http://www.boatdesign.net/forums/attachments/fiberglass-composite-boat-building/1459d1088339529-mast-base-laminate-concerns-mast-base.jpg and...
Hello see picture on the right if i put 1 degree on the mast base, the mast orientation will go forward (direction of Arrow) (saw two catamaran...
40 feet cruising cat
Ok for the water drainage But is the mast is pointed 1 degree forward ? for me il will put more 1 degree backward ? did they cut the mast to make...
Hello I was looking at two catamaran plan and i saw that the Mast Base is not flat , there is 1 degrees going down to the front...
meaning as english is not my first language, can tell me what do you mean by : bcs and btw i think i did understood , but want to make sure...
Hello , i like to have some advise Boat : aluminum catamaran Project : Make A Wood roof (wood , isolation, and wood) For me if think it is...
102 000 Newton it is also the time to reef
Corection a load of 170500 Newton is the max , after the catamaran capsize if the mast or something else didn t break before corection : 170500...
thank look easy for you Ad Hoc, not really for me i know just a bit on this subject , and also always get very confused as my English is not my...
are you placing a mast on the deck and a pillar underneath the deck that is in direct line with the mast and connects the two decks yes but the...
yes a load of 170500 Newton is the max , after the catamaran capsize if the mast or something else didn t break before in my case i should...
the beam did not show on the result the model is (see picture) it is the botton part, the top part is similar The difficult thing is not...
I am planing to put a round pillar my propblem is to properly size the beams and girders of the roof and floor look like the floor beam is...
Hello i am designing a catamaran alumium built love to put the mast on the roof How to make sur it will be ok , strong enought... On the...
hello ,old threath !! just like To know multihull scantlings is covered by ISO 12215-7 is covered on thé last veision and where To...