In house hypalon Its not only the laws. It is just dangerously unhealthy. Have you considered using leather like the original ones. Leather has...
What about fiberoptics? Can be very handy for deadspace inspections. Are they used for boat damage assessments?
When I read AdHoc's reply I thought how comical my GA -one paddler and one backpack- looked compared to his precaution. The smiley was me laughing...
You are right , of course. I am not disregarding the process, just stated the variables at hand. I am sorry if it sounded otherwise.
Thank you for your advice and concern AdHoc, Do not worry I am not looking at anything with more load variables than a backpack and myself.:D...
Sorenfdk, Freeship gives the hydrostatic data for specified trim but I dont know if it is possible to add artificial loads. Also it does not...
Thanks to everyone for their input Sorenfdk and Gomzo, Keeping LCB and COG on the same x coordinate in the first place is a clever approach,...
I am beginning to understand the misgivings of designers over computer drawings. Anyway, what about calculating the trim angle resulting from an...
I have a question if I may. If the final COG-x (after adding the loads) is not the same as LCB the boat will trim right ? If one starts...
This thread is still confusing. It is not clear what the project is. It is not clear who the OP is. It is not clear why they are pissed off for...
There is an option in tools menu "develop plates". Not sure if its exactly the same thing but that will draw a plate projection.
Why is it called semi-planing and not semi-displacement if its a middle ground, compromise solution?
Are you talking about "NSRDC Ship-Motion and Sea-Load Computer Program" ? If that is so a preliminary search showed it is for cdc6700 series...
Most software doesnt work like cake, you cannot have a slice. Which software are you talking about anyway?
Is this thread about reverse engineering an unfinished hull or converting a grp lifeboat into a motorsailer?
This is a fun page that is not about kevlar. It is about the relative penetration power of bullets, as this post has derailed enough I dont think...
I am indeed working in the field of medicine. Quite the opposite of engineering in its practices. My approach to problems caused some of my...
Mr. Cthippo If 1/4 - 1/8 range is suitable , I shall go for 1/5 for ease of scaling. Mr. Terhohalme I am asking what scaling factor will be...
A ballistic vest is backed by your body which allows the aramid fibers to flex. Aramid fibers in resin matrix will behave differently. It may be...
Mr. Yipster have you tried to use a different name server?
