Greetings I am looking for an equivalent / replacement for plate glass using epoxy & fiberglass hand layup. I know the thickness of glass =...
Thanks for the responses It will be half way under ground. As far as the shape anything that is around 16*8*4, oval shaped? Or just a...
I have reading up on Stitch and Glue construction and I have built S&G aquariums and I wanted to go bigger so looking for guidance and feedback....
Thanks for all the input, I do tend to over think things,a lot.......... I don't know what I don't know, and the little info I am able to gather...
So after reading up on Kevlar and properties, Tensile strength Compression Young's modulus elasticity In Toms post he brought up the stiffness...
I am looking to build a lightweight stitch and glue planning hull aprox 12’-13’ An example would be Glen-l bingo, if anyone has a better plan...
Let's throw out the aluminium plans What would be the disadvantages and advantages between the two choices I am probably over thinking the...
I have been doing research on stitch and glue building and design, Devlin's and The new instant boat, and the www The stitch and glue plans I...
Again thank for your time I have purchased plans for the dynojet from glen-l, so I have a good starting point for what I'm going to build. As...
Agreed My purpose for this project is to have a good planing hull, some of the plans/builds I have been following on other sites, and have...
I'm working on a project with freeship and had a question about hydrostatics Its a fast planning hull 9'-11' ft, what does the curve mean?...
Hello All- I have a question about a wood lamination. It’s not boat-related, but there is a great depth of knowledge here. It is for a large...
