a friend of mine has just bought a 23ft cat built in america here in the uk. does anyone recognize the hull and know what make it is as we can...
i normally use marine ply in transoms on boats i build. im now looking at seacast or nidabond pourable transom. does anyone know of any...
i have a pair of merc 115 fourstrokes fitted to my boat. current props are 12 3/4 x 21. does anyone know if i can fit 14" diameter props off...
i have now got 2 corner caps to fit my fender rubber when i get it. i have found the rubber i need which fits the caps. only place i can...
im looking for some one who sell gunnel , gunwale corner caps to fit a pvc fender rubber. i can't find any one in the uk that makes them....
have been looking around at what to put in my flowcoat/topcoat to make it non slip for the decks. what would you use? i used to use kiln...
i used some flowcoat yesterday to start flowcoating out my compartments now there finished. im doing them in light grey. my problem is the...
im soon to be putting in 2 layers of 600/300 combi mat in to my build. now when putting in a layer how much of an overlap should there be from...
on my new boat im building i was going to use 18mm ply in the transom but am now looking at either seacast or nidabond. has any one on here...
im almost at the stage of building the first boat out of my new moulds. once i have finished polishing them all up i give them a coat of wax to...
im almost at the point of moulding my new cat hull. the hull plug is almost finished sanded down ready for duratec paints to be applied and...
as a few of you know from my other thread fairey hunt 18 i have been playing around with the hull mould and made a tunnel cat. i've got a quite a...
hi guys. do any of you know where i can get hold of some plans to build a 6-7 mtr outboard powered cat. needs to be able to cruise at around...
not been on here for a while due to work. my previous project was going to be a 22ft cat which i was going to design and build but i recently...
hi guys. just got hold of a jet drive unit but not sure what make it is. the guy i got it from said it may be a pp65 but im not sure if it is. im...
hi everyone. im new on here. im from england. i used to work for a company over here called catapult catamarans who make 40ft x16ft fast offshore...