saw some guys installing this troweled mix of epoxy and pebbles in a neighbors sauna and had the thought it would make an excellent material for...
watch a video the other day about a guy re-fitting a 40'ish hinkley. upon re glassing the floors he made the comment that he'd driven wood screws...
stumbled across this site ... www.larchdeck.com wondering if anyone has experience or informed opinion about this woods use in boat...
ive not seen one, just wondering if a small plate or fence at the top or the bottom of a sailboats rudder would help to keep the flow parallel?...
I didn't like the clunky sprit through bolted to the deck, so decided to embed a receiver underneath. 1/4' wall biax and epoxy tube heavily...
ive been away from my project for a while but now slowly jumping back in. ive decided to tackle some bow projects and have a few questions......
so there must be a way to do this... I need to cut the final inside curve of a ring frame. 8' span in a 1" thick laminated MDF bulkhead. im...
ok. so ive read all the threads and links i can find and still dont have my head around the theory. heres what id like to do... 40' cutter,...
this fall im getting back to the cockpit build that was put on hold for want of a new rudder. itll roughly follow the shape suggested by par in...
i recently came across a stash of this stuff. http://tri-dee.com/gatorboard.htm polystyrene core with wood fiber outer skins. im thinking of...
time to sand and fair to the waterline, and so i must add the tang/chainplate for the bobstay. how is it typically attached inside the bow? does...
so after years of searching for used oval portholes with no luck, ive decided to take a whack at fabbing my own. the idea is to lay-up the oval...
so my new laminated ipe floors are in and glassed, now to fit the cabin sole. seems i could "cast" a lip of bog between the floor ends and...
so im at the point in this build where the aftermost bulkhead is to be tabbed in. its located just in front of the rudder tube (solid fiberglass...
when cutting stock (VG DOUG FIR) for epoxy-lam deck beams, is the best practice, from a strength perspective, to run the saw cuts through the...
anyone used one of these before? ive got a bunch of molded-in nonskid to remove and was thinking a spiral knife power planer might make quick...
any problem with just leaving the tacking/framing screws in place and laminating over them if they are in an area that will never see moisture?...
chrome over bronze, real stump-pullers. $1000ea or (3) for $2500. shipping from san diego
size 40, brand new and never installed, grey lens, flange mount. $350ea shipping fron san diego.
im changing the porthole/light configuration in my new cabin top. the PO had also changed the original lights and used an extensive amount of...