I was getting those white stringy things too using my little preval sprayer. I thought it was cause I didn't have the PVA all the way up over the...
I bought something from Fibreglast.com called Fibrelease. It lets you skip the wax and PVA. Haven't tried it yet. Once I was waxing a plug with...
No wax? OK I'll give it a shot. Sounds like mass deception/giant hoax on the part of the FG supply companies.
would a cup gun work? That's all I have. I did get some preval sprayers which are aerosol cans that you screw onto the bottle of whatever you're...
I've been practicing on some tile mirrors I got from HD. When applying the partall wax and buffing off I can buff it with a paper towel till I...
balsa/wood bulkheads after the infusion process To avoid the problems with pulling a vacuum on the balsa or wood bulkheads would it be feasible...
Has anyone ever made a resin trap out of a short length of 3" or 4" PVC? You would just have to get the caps to fit either end and find a way to...
I have a part I wish to duplicate which has a slightly negative draft. What I'm thinking about doing is making the mold flexible enough to pop off...
http://www.fibreglast.com/product/Duratec_Thinner_2306/Duratec Here's what I should use - but $54/gallon?
I'm making a plug for my mold and I want to buy some acrylic lacquer thinner to thin out my Duratec sandable primer. All I can find in the local...
