Tom, the equipment in question is an autopilot to hold a straight(ish) course - it has no navigational function. I've been skippering both...
Michael, I've just heard back from Simrad - apparently if I change the Eprom chip on the J33 to a 220 884 62 both units will talk to each other...
Thanks for all the help guys. I've emailed Simrad tech support to see if the AT10 converter will do the trick (I think that that is the one...
Hi Folks, Hopefully somebody can answer this one. I have a Robertson / Simrad autopilot computer, hydraulic pump & ram, and rudder feedback...
Guys, Please accept my sincere apologies, I've had to break off from the boat situation to deal with a family funeral - I'll post back as soon...
Thanks for that W/K, the boat is actually in the UK (and will refit here). I hear what you say, in fact I've just got back from a 10 day trip to...
There is a very ample supply of 'New' i.e. unused, still in a crate, but probably a few years old, marine engines over here. As soon as a new EU...
Gentlemen, thank you very much indeed for your replies! I have to admit that, as I have been so busy, I hadn't really thought through the...
Should have said $ not $$$ I suppose :D Seriously though, I've got a refit to start on my own 70' wooden Gulet from next month - lots to do...
Yes Raw, It's a full length keel with the usual deadwood Fwd of the Prop and rudder astern. The keel is probably about 40' long with 4' draught...
Hi Richard, The boat was built in Bodrum but is now in the UK - it goes into the (indoors) shed next month to start the refit. Steve
Hi Guys, First post on here so go gentle! A bit of an unusual one; I've been around boats since the 1960's but I recently bought a 21...